have I installed a wrong linuxcnc?

More
2 years 11 months ago #286364 by kt600v
have I installed a wrong linuxcnc? was created by kt600v
I've installed linuxcnc 2.9  by downloading the latest ISO.

after copying my previous configuration files (/linuxcnc), It didn't launch anymore.

I attach the errors I get.
 

Please Log in to join the conversation.

More
2 years 11 months ago #286366 by chris@cnc
Replied by chris@cnc on topic have I installed a wrong linuxcnc?
Your custom module is missing. You could try copying this file from your old Linux CNC PC.

Please Log in to join the conversation.

More
2 years 11 months ago #286373 by tommylight
Replied by tommylight on topic have I installed a wrong linuxcnc?
That module is not used by LinuxCNC since 2.7 or earlier, i think, so just delete or omit the line containing probe_parport.so in the hal file.

Please Log in to join the conversation.

Time to create page: 0.074 seconds
Powered by Kunena Forum