A Treatsie on the Parallel Port - HP Elitedesk 800 with generic cable

2 years 3 months ago #304606 by Bari

Replied by Bari on topic A Treatsie on the Parallel Port

Just FYI, for LCNC with LPT cards the lowest latency jitter is typically reached using RTAI.

The latest RTAI debs for 2.9 may be found here:
forum.linuxcnc.org/9-installing-linuxcnc...ng-rtai-debs-for-2-9

Please Log in to join the conversation.

1 year 11 months ago #314332 by garthnoakes

Replied by garthnoakes on topic A Treatsie on the Parallel Port - HP Elitedesk 800 with generic cable

Please Log in to join the conversation.

1 year 11 months ago #314356 by Cant do this anymore bye all

Replied by Cant do this anymore bye all on topic A Treatsie on the Parallel Port - HP Elitedesk 800 with generic cable

Lenovo are the same, still an easier option than messing around with a PCI or PCIe card.

Please Log in to join the conversation.

Time to create page: 0.117 seconds