AXIS does not display tool number

Skidloaders1
Topic Author
Offline
Senior Member

2 years 4 months ago #303767 by Skidloaders1

AXIS does not display tool number was created by Skidloaders1

I have 2 CNC lathes with linuxcnc AXIS.
One of them does not display the loaded tool at the bottom of the screen and does not load the offset in the tool table.
So every time i use the lathe i have to set each tool offset again.
regards Wilfried

Please Log in to join the conversation.

tommylight
Offline
Administrator

2 years 4 months ago #303793 by tommylight

Replied by tommylight on topic AXIS does not display tool number

Probably something missing in the hal or ini file, so do a side by side comparison in a text editor.

Please Log in to join the conversation.

Time to create page: 0.102 seconds