when an inch isn't

tommylight
Offline
Administrator

2 years 4 months ago #303941 by tommylight

Replied by tommylight on topic when an inch isn't

OP ?
Crickets...

Please Log in to join the conversation.

2 years 4 months ago #303946 by Cant do this anymore bye all

Replied by Cant do this anymore bye all on topic when an inch isn't

Crickets ? A measure of lack of response ?

Please Log in to join the conversation.

tommylight
Offline
Administrator

2 years 4 months ago #303949 by tommylight

Replied by tommylight on topic when an inch isn't

Cant do this anymore bye all wrote:
Crickets ? A measure of lack of response ?

Yup !

Please Log in to join the conversation.

Irritant
Topic Author
Offline
Senior Member

2 years 4 months ago #303981 by Irritant

Replied by Irritant on topic when an inch isn't

Ah yes, Bananananas. I recall someone from Aus calling them that. But, he still does a lot of work in bananas!

Please Log in to join the conversation.

Irritant
Topic Author
Offline
Senior Member

2 years 4 months ago #303984 by Irritant

Replied by Irritant on topic when an inch isn't

Hi Guys, I am in Canada so we are prepared to work in any language there is, measurement included. We must remember that an inch is 25.4mm .5 is 12.7 and .250 is 6.35.

I can work in anything but I need this to measure 1" or 25.4mm.

Cheers!

Please Log in to join the conversation.

andypugh
Offline
Administrator

2 years 4 months ago #304013 by andypugh

Replied by andypugh on topic when an inch isn't

Did you change the microstepping number? 1.9 just doesn't make sense.

1.016 is the ratio between 5tpi and 5mm pitch. Maybe the leadscrew isn't the pitch you think it is?

Please Log in to join the conversation.

Time to create page: 0.060 seconds