Pi image to pi 4

More
1 year 10 months ago #317570 by Jdolecki
Pi image to pi 4 was created by Jdolecki
I download the filewhen I try to use the pi image i get this errorwhat am I doing wrong?thanks 

Attachment not found

 

Attachment not found

  

Attachment not found

Please Log in to join the conversation.

More
1 year 10 months ago #317575 by tommylight
Replied by tommylight on topic Pi image to pi 4
Where did you get the image from?
Is there a file or a long string of numbers/letters with something like md5sum or sha256 where you downloaded the image?
Did you check if those numbers/letters are the same?

Please Log in to join the conversation.

More
1 year 10 months ago #317578 by Cant do this anymore bye all
Replied by Cant do this anymore bye all on topic Pi image to pi 4
Rod recommends Balena Etcher.

Please Log in to join the conversation.

More
1 year 10 months ago #317588 by Jdolecki
Replied by Jdolecki on topic Pi image to pi 4
I used the image on Linux cnc download page

And below it said use raspi imager,

Please Log in to join the conversation.

More
1 year 10 months ago #317591 by Cant do this anymore bye all
Replied by Cant do this anymore bye all on topic Pi image to pi 4
Yeah well the internet is full of information that isn't quite correct. Or sometimes information doesn't get updated as quick as it should.

So you have 2 options, argue the toss or use balena etcher.

Please Log in to join the conversation.

More
1 year 10 months ago #317594 by rodw
Replied by rodw on topic Pi image to pi 4

I used the image on Linux cnc download page

And below it said use raspi imager,
As cornholio says, use balena etcher and it will install. A bug in the upstream installer we use broke the rspi Imager which is not as robust as etcher

Please Log in to join the conversation.

More
1 year 10 months ago #317697 by Jdolecki
Replied by Jdolecki on topic Pi image to pi 4
So my laptop running win 11 won’t do it correctly

My laptop running win 10 was totally different acting when downloading the file.
I already had etcher installed.
Worked flawleslly .

B

Please Log in to join the conversation.

Time to create page: 0.101 seconds
Powered by Kunena Forum