Hello,
I am learning git. I cloned data from Github. I compiled it with branches copied from master branche.
I made my first Pull Request with git.
github.com/LinuxCNC/linuxcnc/pull/3434
I celebrated. Everything was fantastic.
Then I needed work with 2.9 branche.
I checked out it:
Code:
zdenek@cnc:~/linuxcnc/linuxcnc-zz912$ git checkout 2.9
branch '2.9' set up to track 'origin/2.9'.
Switched to a new branch '2.9'
zdenek@cnc:~/linuxcnc/linuxcnc-zz912$ git branch
* 2.9
master
pnc-aut-g43
Then I made:
Code:
zdenek@cnc:~/linuxcnc/linuxcnc-zz912/src$ ./autogen.sh
zdenek@cnc:~/linuxcnc/linuxcnc-zz912/src$ ./configure --with-realtime=uspace
zdenek@cnc:~/linuxcnc/linuxcnc-zz912/src$ make -B
.........
Making halcompile manpage constant.9
Making halcompile manpage conv_bit_float.9
Making halcompile manpage conv_bit_s32.9
Making halcompile manpage conv_bit_s64.9
hal/components/conv_bit_s64.comp:3:9: Trying to find one of TYPE
> pin out s64 out;
> ^
while parsing Declaration():
> pin out s64 out;
> ^
while parsing File():
> pin out s64 out;
> ^
make: *** [hal/components/Submakefile:35: ../docs/man/man9/conv_bit_s64.9] Chyba 1
I must do something wrong, because I tried compile branche 2.9 downloaded from Github in zip file and It worked.
I tried git clean and it did not help.
How should I work with different branches with git?
