Upgrading Linuxcnc on Trixie to 2.97 and later forever

More
11 months 1 day ago #339475 by rodw
Upgrading Linuxcnc on Trixie to 2.97 and later forever was created by rodw
A quick 5 minute video outlining how to use APT pinning to upgrade Trixie to LinuxCNC version 2.97 and keep Linuxcnc current forever.

Please like and subscribe for other LinuxCNC specific content.

Please Log in to join the conversation.

Time to create page: 0.363 seconds
Powered by Kunena Forum