Voron Life , for anyone going into 3D printing !

Do you outline your build on YouTube or elsewhere? I am curious on what you used or recommend
for nozzle / hot end.,

Not much on youtube @toma.3d but there are pictures on instagram with same user name @toma.3d
As for nozzle/hotend, all have V6 cold end with Volcano hot end, from 0.4 to 1mm nozzles. Nothing fancy but works properly.

Ironically I came back to this thread to recall what was said about the USB/CAN upgrade.
I still haven't finished my 2.4 because of having the X1C going most of the time 
and hoping Voron Design would have had the Phoenix released by now. Oh well.it's
always something. 
 

Is the Phoenix the 600x600x600 one with cnc machined parts?
If yes, probably will not be released, i recall they mentioned it was made for a client so they might not approve.
Adding my view here, there are 3D models for Voron with 9 or 10mm wide belts, i built one with those at a 460x460x1200mm size, so no need to wait, just print the gantry and toolhead parts for wide belt and size it up as you see fit.
Resizing a Voron is easy, use their wizard on the website, it spits a complete list of parts with actual sizes.

Good point tommylight Though I may modify the models for CNC machining .

I just came across this today, very tempting. Albeit it needs some work.

Seen that a while back, it is a version of Voron 2.4 but bigger.
I have a bigger Voron with 10mm belts all over and i think i linked to files probably twice till now, they ar eon printables.com under the toma.3d name, just in case.

Appreciated as always tommylight. I put the response there to show that there are kits now available
when before there were none.
www.fysetc.com/products/venture-xl
 

You might want to wait a bit till the hysteria settles down and the price will also settle down with it.
Or some China shop will come up with a much cheaper kit, as they did with Voron 0.1.
At the risk of repeating myself, if you have no parts for 3D printers already, it is much better to buy a kit than to source parts yourself, saves a lot of time and even more frustration. Also, after you finally source everything and build the damn thing, you have plenty of parts that don't fit that you payed for so the only reasonable thing is to buy more parts and build another one... That is how i ended up with 5 of Voron 2.4 !!!

Hilariously the XL is open source  github.com/FYSETC/Venture_XL
I am also curious tommylight , have you used other toolheads with the voron 2.4 like the DragonBurner or
RapidBurner? if so what is your opinion of them?