Additive Manufacturing vs 3D Printing

cakeslob wrote:

remora supports both the skr1.3/1.4 and the octopus board, tommy get in on this remora shit,.

I think the Creality CR-30 belt thingy has an STM32Fnnn in it that i am not using as i yanked the XY gantry from it and converted it to cartesian belted printer, so i might give that a go.

come on tommy, like bari said,

Bari wrote:

I don't understand why some people prefer
imgur.com/Ng3VPb3
vs LCNC that gives you
imgur.com/RhCBjtd

You can even do one of those wiz5500 ethernet adapters if you wish.
Im teasing, but if you do it, just post a schematic to the board and we can set you up.

I would send you a board, but it looks like I can air drop it to the frontlines for cheaper than I can send it to you...

cakeslob wrote:

I would send you a board, but it looks like I can air drop it to the frontlines for cheaper than I can send it to you...

[/quote]
Imagine having to deal with that almost every day!
Thank you for the push, it is about time i do something about it.
Much appreciated.

Bari wrote:

When someone says "CNC Machine", do most people think that it is just a mill or lathe and not a wide range of computer controlled machines?

Reading Hackaday, when they say "A CNC" they almost always mean a CNC router rather than mill or lathe.