MesaCT 2.1.6 - Out of box 7i95T board not found

2 years 2 months ago #308966 by PCW

Replied by PCW on topic MesaCT 2.1.6 - Out of box 7i95T board not found

You need to setup a static address on the Ethernet interface
(suggest 10.10.10.100/24 for 7I95T at 10.10.10.10)

Please Log in to join the conversation.

2 years 2 months ago #308979 by ekbiker

Replied by ekbiker on topic MesaCT 2.1.6 - Out of box 7i95T board not found

Never mind. I figured it out. Needed to manually configure my wired interface to 10.10.10.11/8 and set the jumper on the board for 10.10.10.10.

Please Log in to join the conversation.

2 years 2 months ago #308981 by ekbiker

Replied by ekbiker on topic MesaCT 2.1.6 - Out of box 7i95T board not found

Yes, a low battery warning would've been nice.

Please Log in to join the conversation.

Time to create page: 0.034 seconds