Mesact 2 Setup

More
1 year 11 months ago #313653 by JT
Replied by JT on topic Mesact 2 Setup
I tested in Debian 13 and got debian so I'm a bit confused and waiting for your test.

JT

Please Log in to join the conversation.

More
1 year 11 months ago #313659 by JT
Replied by JT on topic Mesact 2 Setup
I just ran the live cd from Linuxcnc and they chose to not have the python3-distro package installed by default... you can install python3-distro from a terminal with
Code:
sudo apt install python3-distro

I'll add that to the requirements...

JT

Please Log in to join the conversation.

More
1 year 11 months ago #313660 by JT
Replied by JT on topic Mesact 2 Setup
Well if python3-distro is a required package and also in the readme so not sure where you went wrong... did you download and install the deb with gdebi?

JT

Please Log in to join the conversation.

More
1 year 11 months ago #313684 by tray
Replied by tray on topic Mesact 2 Setup
Hi JT,

Thanks for replying.

>>> distro.id()
'linuxmint'

Your application was looking for 'debian' ;)

Please Log in to join the conversation.

More
1 year 11 months ago #313685 by tray
Replied by tray on topic Mesact 2 Setup
"Well if python3-distro is a required package and also in the readme so not sure where you went wrong... did you download and install the deb with gdebi?"

Yup, I used gdebi from the terminal

Please Log in to join the conversation.

More
1 year 11 months ago #313698 by tray
Replied by tray on topic Mesact 2 Setup
Hi,

Yup, new version mesact_2.1.7_amd64_1 reports as linuxmint also

Thanks

Please Log in to join the conversation.

More
1 year 11 months ago #313701 by JT
Replied by JT on topic Mesact 2 Setup
I've added linuxmint to the list of distros, thanks for the feedback.

JT

Please Log in to join the conversation.

More
1 year 11 months ago #313742 by tray
Replied by tray on topic Mesact 2 Setup
Hi JT, more feedback.

Yup, the latest mesact version runs on linuxmint.

Thank you sir. Now on to the proper hard stuff, software & hardware

Have a good day. Thanks.

Please Log in to join the conversation.

More
1 year 9 months ago #318316 by gbsd86
Replied by gbsd86 on topic Mesact 2 Setup
Using LinuxCNC Bookworm. Have downloaded file from packages.debian.org/sid/python3-distro . Not sure what to do with it.
Also tried adding linuxmint to Synaptic repositories. Not doing it correctly.
Some guidance would be appreciated.
Thanks.

Please Log in to join the conversation.

More
1 year 9 months ago #318320 by JT
Replied by JT on topic Mesact 2 Setup

Using LinuxCNC Bookworm. Have downloaded file from packages.debian.org/sid/python3-distro . Not sure what to do with it.
Also tried adding linuxmint to Synaptic repositories. Not doing it correctly.
Some guidance would be appreciated.
Thanks.
 
What are you trying to do? Mesact is not in debian packages.

JT

Please Log in to join the conversation.

Time to create page: 0.067 seconds
Powered by Kunena Forum