- Posts: 85
- Thank you received: 0
Ethercat to modbus
4 years 10 months ago #229136
by wang
Ethercat to modbus was created by wang
Ask for help
I have an Ethercat to modbus (RS485) module I want to use in a linuxcnc system. I configured the XML file but cannot enter the OP state.
Below is the official XML description of the device
<?xml version="1.0" ?>
<EtherCATInfo>
<!-- Slave 3 -->
<Vendor>
<Id>2852171953</Id>
</Vendor>
<Descriptions>
<Devices>
<Device>
<Type ProductCode="#x00010001" RevisionNo="#x00070001">Adapter</Type>
<Name><![CDATA[Adapter]]></Name>
<Sm Enable="1" StartAddress="#x1000" ControlByte="#x36" DefaultSize="128" />
<Sm Enable="1" StartAddress="#x1080" ControlByte="#x32" DefaultSize="128" />
<Sm Enable="1" StartAddress="#x1100" ControlByte="#x74" DefaultSize="200" />
<Sm Enable="1" StartAddress="#x1d00" ControlByte="#x30" DefaultSize="200" />
<RxPdo Sm="2" Fixed="1" Mandatory="1">
<Index>#x1600</Index>
<Name></Name>
<Entry>
<Index>#x7000</Index>
<SubIndex>1</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>2</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>3</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>4</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>5</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>6</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>7</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>8</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>9</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>10</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>11</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>12</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>13</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>14</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>15</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>16</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>17</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>18</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>19</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>20</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>21</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>22</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>23</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>24</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>25</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>26</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>27</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>28</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>29</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>30</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>31</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>32</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
</RxPdo>
<TxPdo Sm="3" Fixed="1" Mandatory="1">
<Index>#x1a00</Index>
<Name></Name>
<Entry>
<Index>#x6000</Index>
<SubIndex>1</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>2</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>3</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>4</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>5</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>6</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>7</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>8</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
</TxPdo>
</Device>
</Devices>
</Descriptions>
</EtherCATInfo>
Below is my XML file
The following is a description of this device
<slave idx="6" type="generic" vid="0xaa00b0b1" pid="0x00010001" configPdos="true">
<syncManager idx="0" dir="out">
<pdo idx="1600">
<pdoEntry idx="7000" subIdx="01" bitLen="16" halPin="SERTX_01" halType="bit"/>
<pdoEntry idx="7000" subIdx="02" bitLen="16" halPin="SERTX_02" halType="bit"/>
<pdoEntry idx="7000" subIdx="03" bitLen="16" halPin="SERTX_03" halType="bit"/>
<pdoEntry idx="7000" subIdx="04" bitLen="16" halPin="SERTX_04" halType="bit"/>
<pdoEntry idx="7000" subIdx="05" bitLen="16" halPin="SERTX_05" halType="bit"/>
<pdoEntry idx="7000" subIdx="06" bitLen="16" halPin="SERTX_06" halType="bit"/>
<pdoEntry idx="7000" subIdx="07" bitLen="16" halPin="SERTX_07" halType="bit"/>
<pdoEntry idx="7000" subIdx="08" bitLen="16" halPin="SERTX_08" halType="bit"/>
<pdoEntry idx="7000" subIdx="09" bitLen="16" halPin="SERTX_09" halType="bit"/>
<pdoEntry idx="7000" subIdx="0a" bitLen="16" halPin="SERTX_10" halType="bit"/>
<pdoEntry idx="7000" subIdx="0b" bitLen="16" halPin="SERTX_11" halType="bit"/>
<pdoEntry idx="7000" subIdx="0c" bitLen="16" halPin="SERTX_12" halType="bit"/>
<pdoEntry idx="7000" subIdx="0d" bitLen="16" halPin="SERTX_13" halType="bit"/>
<pdoEntry idx="7000" subIdx="0e" bitLen="16" halPin="SERTX_14" halType="bit"/>
<pdoEntry idx="7000" subIdx="0f" bitLen="16" halPin="SERTX_15" halType="bit"/>
<pdoEntry idx="7000" subIdx="10" bitLen="16" halPin="SERTX_16" halType="bit"/>
<pdoEntry idx="7000" subIdx="11" bitLen="16" halPin="SERTX_17" halType="bit"/>
<pdoEntry idx="7000" subIdx="12" bitLen="16" halPin="SERTX_18" halType="bit"/>
<pdoEntry idx="7000" subIdx="13" bitLen="16" halPin="SERTX_19" halType="bit"/>
<pdoEntry idx="7000" subIdx="14" bitLen="16" halPin="SERTX_20" halType="bit"/>
<pdoEntry idx="7000" subIdx="15" bitLen="16" halPin="SERTX_21" halType="bit"/>
<pdoEntry idx="7000" subIdx="16" bitLen="16" halPin="SERTX_22" halType="bit"/>
<pdoEntry idx="7000" subIdx="17" bitLen="16" halPin="SERTX_23" halType="bit"/>
<pdoEntry idx="7000" subIdx="18" bitLen="16" halPin="SERTX_24" halType="bit"/>
<pdoEntry idx="7000" subIdx="19" bitLen="16" halPin="SERTX_25" halType="bit"/>
<pdoEntry idx="7000" subIdx="1a" bitLen="16" halPin="SERTX_26" halType="bit"/>
<pdoEntry idx="7000" subIdx="1b" bitLen="16" halPin="SERTX_27" halType="bit"/>
<pdoEntry idx="7000" subIdx="1c" bitLen="16" halPin="SERTX_28" halType="bit"/>
<pdoEntry idx="7000" subIdx="1d" bitLen="16" halPin="SERTX_29" halType="bit"/>
<pdoEntry idx="7000" subIdx="1e" bitLen="16" halPin="SERTX_30" halType="bit"/>
<pdoEntry idx="7000" subIdx="1f" bitLen="16" halPin="SERTX_31" halType="bit"/>
<pdoEntry idx="7000" subIdx="20" bitLen="16" halPin="SERTX_32" halType="bit"/>
</pdo>
</syncManager>
<syncManager idx="1" dir="in">
<pdo idx="1a00">
<pdoEntry idx="6000" subIdx="01" bitLen="16" halPin="SERRX_01" halType="bit"/>
<pdoEntry idx="6000" subIdx="02" bitLen="16" halPin="SERRX_02" halType="bit"/>
<pdoEntry idx="6000" subIdx="03" bitLen="16" halPin="SERRX_03" halType="bit"/>
<pdoEntry idx="6000" subIdx="04" bitLen="16" halPin="SERRX_04" halType="bit"/>
<pdoEntry idx="6000" subIdx="05" bitLen="16" halPin="SERRX_05" halType="bit"/>
<pdoEntry idx="6000" subIdx="06" bitLen="16" halPin="SERRX_06" halType="bit"/>
<pdoEntry idx="6000" subIdx="07" bitLen="16" halPin="SERRX_07" halType="bit"/>
<pdoEntry idx="6000" subIdx="08" bitLen="16" halPin="SERRX_08" halType="bit"/>
</pdo>
</syncManager>
<dcConf assignActivate="100" sync0Cycle="*1" sync0Shift="250000"/>
</slave>
Entered SAEFOP
still have a question
How should I send a message to the serial port through ethercat, and how to read it at the same time?
Do I still need to use ethercat command in linuxcnc?
For example
ethercat download -t uint16 0x7000 01 1
ethercat upload -t uint16 0x6000 01
Summarize a total of two questions
①Ethercat to serial device cannot enter OP state
②What method should be used to assign value to ethercat pdos in linuxcnc, is it the ethercat instruction?
Thank you for your patience, if you can make suggestions I will be very grateful
wang
I have an Ethercat to modbus (RS485) module I want to use in a linuxcnc system. I configured the XML file but cannot enter the OP state.
Below is the official XML description of the device
Warning: Spoiler!
<?xml version="1.0" ?>
<EtherCATInfo>
<!-- Slave 3 -->
<Vendor>
<Id>2852171953</Id>
</Vendor>
<Descriptions>
<Devices>
<Device>
<Type ProductCode="#x00010001" RevisionNo="#x00070001">Adapter</Type>
<Name><![CDATA[Adapter]]></Name>
<Sm Enable="1" StartAddress="#x1000" ControlByte="#x36" DefaultSize="128" />
<Sm Enable="1" StartAddress="#x1080" ControlByte="#x32" DefaultSize="128" />
<Sm Enable="1" StartAddress="#x1100" ControlByte="#x74" DefaultSize="200" />
<Sm Enable="1" StartAddress="#x1d00" ControlByte="#x30" DefaultSize="200" />
<RxPdo Sm="2" Fixed="1" Mandatory="1">
<Index>#x1600</Index>
<Name></Name>
<Entry>
<Index>#x7000</Index>
<SubIndex>1</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>2</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>3</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>4</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>5</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>6</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>7</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>8</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>9</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>10</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>11</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>12</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>13</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>14</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>15</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>16</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>17</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>18</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>19</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>20</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>21</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>22</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>23</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>24</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>25</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>26</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>27</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>28</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>29</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>30</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>31</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x7000</Index>
<SubIndex>32</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
</RxPdo>
<TxPdo Sm="3" Fixed="1" Mandatory="1">
<Index>#x1a00</Index>
<Name></Name>
<Entry>
<Index>#x6000</Index>
<SubIndex>1</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>2</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>3</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>4</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>5</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>6</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>7</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
<Entry>
<Index>#x6000</Index>
<SubIndex>8</SubIndex>
<BitLen>16</BitLen>
<Name></Name>
<DataType>UINT16</DataType>
</Entry>
</TxPdo>
</Device>
</Devices>
</Descriptions>
</EtherCATInfo>
Below is my XML file
Attachment not found
The following is a description of this device
Warning: Spoiler!
<slave idx="6" type="generic" vid="0xaa00b0b1" pid="0x00010001" configPdos="true">
<syncManager idx="0" dir="out">
<pdo idx="1600">
<pdoEntry idx="7000" subIdx="01" bitLen="16" halPin="SERTX_01" halType="bit"/>
<pdoEntry idx="7000" subIdx="02" bitLen="16" halPin="SERTX_02" halType="bit"/>
<pdoEntry idx="7000" subIdx="03" bitLen="16" halPin="SERTX_03" halType="bit"/>
<pdoEntry idx="7000" subIdx="04" bitLen="16" halPin="SERTX_04" halType="bit"/>
<pdoEntry idx="7000" subIdx="05" bitLen="16" halPin="SERTX_05" halType="bit"/>
<pdoEntry idx="7000" subIdx="06" bitLen="16" halPin="SERTX_06" halType="bit"/>
<pdoEntry idx="7000" subIdx="07" bitLen="16" halPin="SERTX_07" halType="bit"/>
<pdoEntry idx="7000" subIdx="08" bitLen="16" halPin="SERTX_08" halType="bit"/>
<pdoEntry idx="7000" subIdx="09" bitLen="16" halPin="SERTX_09" halType="bit"/>
<pdoEntry idx="7000" subIdx="0a" bitLen="16" halPin="SERTX_10" halType="bit"/>
<pdoEntry idx="7000" subIdx="0b" bitLen="16" halPin="SERTX_11" halType="bit"/>
<pdoEntry idx="7000" subIdx="0c" bitLen="16" halPin="SERTX_12" halType="bit"/>
<pdoEntry idx="7000" subIdx="0d" bitLen="16" halPin="SERTX_13" halType="bit"/>
<pdoEntry idx="7000" subIdx="0e" bitLen="16" halPin="SERTX_14" halType="bit"/>
<pdoEntry idx="7000" subIdx="0f" bitLen="16" halPin="SERTX_15" halType="bit"/>
<pdoEntry idx="7000" subIdx="10" bitLen="16" halPin="SERTX_16" halType="bit"/>
<pdoEntry idx="7000" subIdx="11" bitLen="16" halPin="SERTX_17" halType="bit"/>
<pdoEntry idx="7000" subIdx="12" bitLen="16" halPin="SERTX_18" halType="bit"/>
<pdoEntry idx="7000" subIdx="13" bitLen="16" halPin="SERTX_19" halType="bit"/>
<pdoEntry idx="7000" subIdx="14" bitLen="16" halPin="SERTX_20" halType="bit"/>
<pdoEntry idx="7000" subIdx="15" bitLen="16" halPin="SERTX_21" halType="bit"/>
<pdoEntry idx="7000" subIdx="16" bitLen="16" halPin="SERTX_22" halType="bit"/>
<pdoEntry idx="7000" subIdx="17" bitLen="16" halPin="SERTX_23" halType="bit"/>
<pdoEntry idx="7000" subIdx="18" bitLen="16" halPin="SERTX_24" halType="bit"/>
<pdoEntry idx="7000" subIdx="19" bitLen="16" halPin="SERTX_25" halType="bit"/>
<pdoEntry idx="7000" subIdx="1a" bitLen="16" halPin="SERTX_26" halType="bit"/>
<pdoEntry idx="7000" subIdx="1b" bitLen="16" halPin="SERTX_27" halType="bit"/>
<pdoEntry idx="7000" subIdx="1c" bitLen="16" halPin="SERTX_28" halType="bit"/>
<pdoEntry idx="7000" subIdx="1d" bitLen="16" halPin="SERTX_29" halType="bit"/>
<pdoEntry idx="7000" subIdx="1e" bitLen="16" halPin="SERTX_30" halType="bit"/>
<pdoEntry idx="7000" subIdx="1f" bitLen="16" halPin="SERTX_31" halType="bit"/>
<pdoEntry idx="7000" subIdx="20" bitLen="16" halPin="SERTX_32" halType="bit"/>
</pdo>
</syncManager>
<syncManager idx="1" dir="in">
<pdo idx="1a00">
<pdoEntry idx="6000" subIdx="01" bitLen="16" halPin="SERRX_01" halType="bit"/>
<pdoEntry idx="6000" subIdx="02" bitLen="16" halPin="SERRX_02" halType="bit"/>
<pdoEntry idx="6000" subIdx="03" bitLen="16" halPin="SERRX_03" halType="bit"/>
<pdoEntry idx="6000" subIdx="04" bitLen="16" halPin="SERRX_04" halType="bit"/>
<pdoEntry idx="6000" subIdx="05" bitLen="16" halPin="SERRX_05" halType="bit"/>
<pdoEntry idx="6000" subIdx="06" bitLen="16" halPin="SERRX_06" halType="bit"/>
<pdoEntry idx="6000" subIdx="07" bitLen="16" halPin="SERRX_07" halType="bit"/>
<pdoEntry idx="6000" subIdx="08" bitLen="16" halPin="SERRX_08" halType="bit"/>
</pdo>
</syncManager>
<dcConf assignActivate="100" sync0Cycle="*1" sync0Shift="250000"/>
</slave>
Entered SAEFOP
Attachment not found
still have a question
How should I send a message to the serial port through ethercat, and how to read it at the same time?
Do I still need to use ethercat command in linuxcnc?
For example
ethercat download -t uint16 0x7000 01 1
ethercat upload -t uint16 0x6000 01
Summarize a total of two questions
①Ethercat to serial device cannot enter OP state
②What method should be used to assign value to ethercat pdos in linuxcnc, is it the ethercat instruction?
Thank you for your patience, if you can make suggestions I will be very grateful
wang
Please Log in to join the conversation.
4 years 10 months ago #229137
by wang
Replied by wang on topic Ethercat to modbus
After writing the xml file, when I open linuxcnc, the other axis drives all enter the OP state, but this Ethercat to serial port cannot enter the OP but enters SAEFOP
Please Log in to join the conversation.
Time to create page: 0.088 seconds