- Posts: 1111
- Thank you received: 0
mint 21 or 20 suggestion ...
3 years 11 months ago #257208
by bkt
mint 21 or 20 suggestion ... was created by bkt
Because mint/ubuntu lover i search the best distro for new rt-kernel.
Someone can suggest me best last rt-kernel for ethrcat + mint xx??
I install over H210 and I5-7500 ....
best regards
Someone can suggest me best last rt-kernel for ethrcat + mint xx??
I install over H210 and I5-7500 ....
best regards
Please Log in to join the conversation.
- tommylight
-
- Offline
- Administrator
-
Less
More
- Posts: 22010
- Thank you received: 3
3 years 11 months ago #257227
by tommylight
Replied by tommylight on topic mint 21 or 20 suggestion ...
I use Mint 21 with 6.0.2 Debian RT kernel.
I do not use ethercat.
The new kernels have issues with Realtek network cards, so check that before jumping to new kernels.
I do not use ethercat.
The new kernels have issues with Realtek network cards, so check that before jumping to new kernels.
Please Log in to join the conversation.
3 years 11 months ago #257252
by rodw
Replied by rodw on topic mint 21 or 20 suggestion ...
Tommy is right.
I don't think ethercat is affected by the realtek card causing excessive network latency like the mesa cards
Just follow my sticky to install ethercat for Debian Bookworm (I think). This should get the right ethercat distro for kernel 6.0
I don't think ethercat is affected by the realtek card causing excessive network latency like the mesa cards
Just follow my sticky to install ethercat for Debian Bookworm (I think). This should get the right ethercat distro for kernel 6.0
Please Log in to join the conversation.
3 years 11 months ago #257867
by bkt
Replied by bkt on topic mint 21 or 20 suggestion ...
so your suggestion was for Mint20 + kernel 6.0 + ethercat? .... using kernel 5.x??
regards
bkt
regards
bkt
Please Log in to join the conversation.
- tommylight
-
- Offline
- Administrator
-
Less
More
- Posts: 22010
- Thank you received: 3
3 years 11 months ago #257871
by tommylight
Replied by tommylight on topic mint 21 or 20 suggestion ...
Mint 20 does not work with LinuxCNC 2.9 due to Python related issues.
It does compile and run without issues though, just not using the ready made debs.
It does compile and run without issues though, just not using the ready made debs.
Please Log in to join the conversation.
Time to create page: 0.078 seconds
