How to connect servo drives with Linuxcnc ?

More
3 years 8 months ago #263580 by Sukritmt786
How to connect servo drives with Linuxcnc ? was created by Sukritmt786
Hi All,

I can detect slave devices from "ethercat slaves command".
But

I don't know how to connect and configure in Linuxcnc application, So that I can perform operation on Panasonic Servo drives from Linuxcnc application Through EtherCAT.

I have researched on Internet but things didn't work.
Please help me with details.

Please Log in to join the conversation.

More
3 years 8 months ago #263591 by rodw
Replied by rodw on topic How to connect servo drives with Linuxcnc ?
Follow this
forum.linuxcnc.org/ethercat/45336-etherc...-how-to-step-by-step

And please do  not do multiple posts of the same topic again

Please Log in to join the conversation.

More
3 years 8 months ago #263597 by tommylight
Replied by tommylight on topic How to connect servo drives with Linuxcnc ?
@Sukritmt786,
No double posting, makes it impossible to follow what has already been answered.

Please Log in to join the conversation.

More
3 years 8 months ago #264017 by Sukritmt786
Replied by Sukritmt786 on topic How to connect servo drives with Linuxcnc ?
I had tried this but it doesn't work.

Please Log in to join the conversation.

More
3 years 8 months ago #264173 by andypugh
Replied by andypugh on topic How to connect servo drives with Linuxcnc ?
Do you see any error messages?

Exactly what doesn't work?

Please Log in to join the conversation.

Time to create page: 0.087 seconds
Powered by Kunena Forum