Config with syncManager idx="4" and syncManager idx="5"

Hello,

have anybody working configuration with non periodical time cyclical communication over syncManager idx="4" and syncManager idx="5" please?

If yes please share them with us

Is lcec master supporting them please? I can not find any informations.... 

Regards Slav

Hello Slav,

for me a configuration with SM4/5 is working, config attached.
In fact, this is the only way I can get LCEC to cyclically send the object 0x2861 (control of digital outputs). With the attached config, all objects are cyclically updated. When I put the config for object 0x2861 into SM2 instead of 4, it won't be updated at all. All other objects in my config work with SM2/3.

Regards
Stefan

Sure, thats true because 2 and 3 are force cyclical updated in predeterminated time period and 4 and 5 is not...

But I want to know if etherlab master which we are using has 4 and 5 sync .... 

some of stuff as free digital or analog Inputs/Outputs or datas from slave should not have exact timing like stuff for motion handler... it is very usefull that we have more syncs...

but I can recommend you to configure DC somewhere there... because of motion handler and other cyclic stuff