Ethercat auto configurator.

The link seen to be broken, it leads to a 404 page, but it's a cool idea.

Hello!
I am attempting to compile the configurator but I'm running into an issue. 
To compile it needs "ethercat_master/tool/common.h"
I went to  gitlab.com/etherlab.org/ethercat but that codebase does not contain a "common.h" file in the tool directory.
Any assistance on compiling would be appreciated.
 

Hi,
I have the same problem.
First, it couldn't find common.h. Then I added the file from ethercat-master source.
Now I get the error 

-- Generating done
CMake Generate step failed.  Build files cannot be regenerated correctly.

Now I'm wondering, is this the right way to go, or does this project have to be used?
skynet/realtime_app - Codeberg.org

Hello.
All the links are broken.
So sad because I'm trying to run ethercat in my CNC and I'm having serious troubles to start them. Sometimes I have no idea if I'm making wrong things or there are problems with the repositories

Regards

I don't think this will be of much use to you.
There are many topics and instructions on setting up LinuxCNC EtherCAT.
First, check whether your system and CIA402 servos are compatible. Then start setting up your system using the templates. If you get stuck, start a topic in the forum.
This thread is not suitable for that.

It shows a 404 error on Codeberg, and the videos on YouTube won't open at all.

I was wrong, I've found it, sorry.