Help to configure external start button and external emergency button, EK1100

Hello,

Iam using EK1100 coupler and EL1008 for inputs and EL2008 to outputs, i try make in .hal file the configuration to use external buttons for Start and Emergency, how i can make in .hal file to link the rights io's ins .hal file.

Thanks for the help. 

Moved to "EtherCAT" section.

@Leuo_

Follow either of these two links and in the first post go down to PART 6 - LET’S SEE ETHERCAT WORK IN THE REAL WORLD .  There are detailed instructions on how to do the external Stop button and you should see how to do a start button also. 

Ethercat build from source - full instructions - LinuxCNC

Ethercat build from source instructions - Updated for 2024 - LinuxCNC

Hope it helps,
Robert

Hello Corbett

Thank you very much!

I'll try it here