Hltnc servo motor

Reyes
Topic Author
Offline
New Member

1 year 2 months ago #332878 by Reyes

Hltnc servo motor was created by Reyes

Can i use this ac servo motor for
building my mini diy linux ethercat CNC?

Attachment not found

Please Log in to join the conversation.

Todd Zuercher
Offline
Platinum Member

1 year 2 months ago #332902 by Todd Zuercher

Replied by Todd Zuercher on topic Hltnc servo motor

Almost certainly, provided it is capable of accepting either analog velocity or torque commands, or digital positioning commands (step/dir or quadrature.) or can do EtherCAT.

Please Log in to join the conversation.

PCW
Offline
Platinum Member

1 year 2 months ago #332909 by PCW

Replied by PCW on topic Hltnc servo motor

That particular drive (80 AST ...) does not seem to be EtherCAT
but they may have an EtherCAT model.

Please Log in to join the conversation.

Time to create page: 0.101 seconds