Tuning lichuan servos

Philip Lydin
Topic Author
Offline
Senior Member

5 months 2 weeks ago #346316 by Philip Lydin

Tuning lichuan servos was created by Philip Lydin

I’m trying to tune my eethercat lichuan a5 servos but I’m getting around 0.02mm ferror instantly regardless the speed which then quickly drops to a couple microns steady. Can you recommend a way to fix it or is it ok as is?

Please Log in to join the conversation.

tommylight
Away
Administrator

5 months 2 weeks ago #346319 by tommylight

Replied by tommylight on topic Tuning lichuan servos

Moved to "EtherCAT" section.

Please Log in to join the conversation.

Time to create page: 0.066 seconds