Lcnc_3dGraphics

JT
Topic Author
Online
Administrator

2 years 5 months ago #301478 by JT

Lcnc_3dGraphics was created by JT

Just floundering about I tried to add Lcnc_3dGraphics to a QFrame container to see if by magic that would work.

Code:

def setup_plot(parent):
if 'plot_widget' in parent.children:
from qt5_graphics import Lcnc_3dGraphics
layout = QVBoxLayout(parent.plot_widget)
layout.addWidget(Lcnc_3dGraphics)

And I get this error.

Code:

layout.addWidget(Lcnc_3dGraphics)
TypeError: addWidget(self, a0: QWidget, stretch: int = 0, alignment: Qt.AlignmentFlag = Qt.Alignment()): argument 1 has unexpected type 'sip.wrappertype'

Please Log in to join the conversation.

JT
Topic Author
Online
Administrator

2 years 5 months ago #301482 by JT

Replied by JT on topic Lcnc_3dGraphics

I also tried the following

Code:

def setup_plot(parent):
    if 'plot_widget' in parent.children:
        from qt5_graphics import Lcnc_3dGraphics
        parent[code].plotter = Lcnc_3dGraphics()
        layout = QVBoxLayout(parent.plot_widget)
        layout.addWidget(parent[code].plotter)

And got this error

Code:

john@cave:~/github/flexgui/flexgui/src$ ./flexgui
[DEFAULT][INFO]  Logging to: /home/john/default.log (logger.py:106)
QWidget: Must construct a QApplication before a QWidget
Aborted

So something is working up to a point.
JT

Please Log in to join the conversation.

JT
Topic Author
Online
Administrator

2 years 5 months ago #301484 by JT

Replied by JT on topic Python gcode.parse and gcode.calc_extents

Well this will not work Flex GUI is PyQt6 and all of lcnc is pyqt5... and QGLWidget is not in Qt6 it's been removed.

JT

Please Log in to join the conversation.

Felipe5Sosa
Offline
New Member

2 years 3 months ago #304971 by Felipe5Sosa

Replied by Felipe5Sosa on topic Python gcode.parse and gcode.calc_extents

Great info btw

Please Log in to join the conversation.

Time to create page: 1.453 seconds