Flex GUI Themes

I've added a few themes to Flex GUI. Notice the nice arrows on the spin boxes.

Blue Theme


Dark Theme


Blue Touch Screen Theme


Dark Touch Screen Theme


To add a theme you just add an ini entry.
gnipsel.com/linuxcnc/flexgui/ini.html#themes

JT

Very cool, this looks like it's coming along nicely and you're even taking the time to write the documentation. Hopefully I'll get back around to my control panel project so I can dig into this.Any suggestion what example would be a good place to start for a control panel like this, where it has a touch screen but would mostly use physical controls? This would be for a small mill (3 axis with 4th) and I currently do toolsetting on change with Gmoccapy 

 

That's best part about the Flex GUI you can put what YOU want/need in the GUI. I would think you can build the GUI you want in just a few minutes. BTW, there is a series of videos on Flex GUI. www.youtube.com/@Gnipsel/playlists



JT

JT wrote:

That's best part about the Flex GUI you can put what YOU want/need in the GUI. I would think you can build the GUI you want in just a few minutes. BTW, there is a series of videos on Flex GUI. www.youtube.com/@Gnipsel/playlists
 

It's always hard to get started with something like this, starting from an example is generally easier but I think I'll start from scratch. I'll throw some questions at a more general post about flex....don't wanna clog up this one.

Did a little tweaking on the themes




JT