Fusion ATC post

7 years 7 months ago #127550 by allenwg2005

Fusion ATC post was created by allenwg2005

Hi Folks,

Has anyone dealt with a post for F360 that incorporates a Auto Tool Change??

THX

Please Log in to join the conversation.

7 years 7 months ago #127570 by pl7i92

Replied by pl7i92 on topic Fusion ATC post

the ATC is controled by the mashine iO Linuxcnc
not the Postprocessor
so Tx M6 will do the Trick

Please Log in to join the conversation.

Time to create page: 0.133 seconds