Fusion 360 - EMC Post ?

Hello. Didnt want to cook new topic. Here are pictures of Fusion simulations and reality..why would I get so different results? It shouldnt be SO round.
 

Also I had this problem - different radius on different depths.
 

Disable G64 path blending, set a G64 P0.1 for mm or G64 P0.004 for inch.
Oh i see you have it set, so what is the tool diameter ?

It might be worth looking through the generated code to see if it changes the G64 setting at any point.

I did cut these earlier..didnt notice, but it was fine.. now its round. Maybe unticking g64 will fix? Tool diameter 5.8mm

Ok, seems that on one of PC` s there is g64 option and on other one - there isnt one. How can I add it?
I thought same Fusion profiles share same settings, no matter on what PC I use Fusion.

Are they both set up to use exactly the same postprocessor?

Probably no.. is there a chance to add g64 option?

Hello,

the post proccecors and setting are local in the standard settings.

You have to change to cloud-post proccesorcs, in your settings to get it the same on every pc.

Hi, 

I have the very same problem as Pauchuk has, my inside corner radius is way of. I did not change anything in my workflow, neither I had similar issues before. I never paid attention to G64 in g-code. 

What I can see is that Fusion recently updated UI during post processing, and today was the first time after update when I actually used post processor and router. 

Like I said I did not pay attention was there G64 in greeted code before or was not, but I am sure that I can't find it now. 

Could someone confirm that latest Fusion 360 Post processor works as it should?

   
Please see attached g code straight from post processor

 

Apparently default Fusion 360 post processor never added G64. It might be coincident that only now I faced the issue. I updated latest Fusion's post processor with G64. Credits spangledboy.Please see attached file. Post processor is not tested in real life, but G code looks ok, will test it tomorrow.