Gmoccapy - A new screen for linuxcnc

@cmorley @andypugh @newbynobi

Thank you for your help. I am now near a solution.
I will try to use Python class inheritance to keep my modifications outside the official gmoccapy, so that upgrade will be easy.

In my setup, tool change is manual. So, during G-Code execution, it will be safer to prompt for the tool with a human readable description instead of tool number. Also, automatic synchronization of tool table with Cambam is a must for me because I have not yet stabilized my Cambam tools list.

Excellent.
Please post a video or something when you get it working.
I'd like to see it

Chris M

Hello,

<< git pull and git reset >>> to see the improvements made, but will not leave me any GScreen and gmoccapy configs, I get this error.


Jorge Viloria

Halo Jorge,

you must have tested pynggcgui before it was included in linuxcnc.
Which means it's still there in lib/python or lib/python/gladevcp

purge all the versions that are not included in the official source.
GObject is trying to register two programs with that same name.
I got caught with it too I mentioned it in the maillist.

The quote is an email from Chris, because I also traped in it. I made a new git clone and transfered later my data to it.

Norbert

Norbert, thanks

I have not been able ... delete everything and install everything again and nothing.


Jorge

Jorge,

what exactly have you done?
I solved the problem, just renaming my old linuxcnc_dev to linuxcnc_dev.org
and than I made a new git clone
and than just follow the WIKI.

Norbert

Do you like the following?
And my question, what is new???
(The GUI is in German, but is also availible in English

@Marius, it is the cherry on my cake

Norbert

Waiting for Chris to push!

Norbert, thanks

I did just that, I made another LinuxCNC-dev, and nothing came back to install the same.

Jorge

Hmmmm it's getting sweeter and sweeter

@Jorge,

Than your system does mx something.
Unfortunately I am not able to help from here.

Have you done a make clean?
And have you done all the config and make things in the correct directory?

Norbert