screen resolution

The minimum screen resolution for gmoccapy, using it without side panels is 979 x 750 Pixel.
Is it possible 800x600 for touch panel 12" .
I opened /usr/share/gmoccapy/gmoccapy.glade with Glade .
File read-only .Please tell Is it possible resolution 800x600 ?

Change the file rights and edit it to your needs.
Do ot delete or rename widgets and all should be fine!

In spanish, but a good guide to come to 800 x 480.




Norbert

newbynobi wrote: In spanish, but a good guide to come to 800 x 480.

Norbert

I could not find it, please link

Strange, one post got lost and all the links and code
Very strange, so here again:

Gmoccapy 800x480

Norbert

Thank You
Thank You
Thank You

gmoccapy_lcd7
Yes, I like it ,for now I see no keyboard in tool table editor

Hello Dinkata, did you reconfigure GMOCappy to 800x600? I also have 10" screen with this resolution, and intend to use it for a Lathe controller.

Mark

RotarySMP wrote: Hello Dinkata, did you reconfigure GMOCappy to 800x600?
Mark

I use gmocappy_lcd 7 on 12" touch screen monitor for Lathe

dinkata wrote:

RotarySMP wrote: Hello Dinkata, did you reconfigure GMOCappy to 800x600?
Mark

I use gmocappy_lcd 7 on 12" touch screen monitor for Lathe

Attachment not found

Dang that is a nice setup. I can read "rucen hod" so that is Russian, right?? Meaning "manual movement" ???

Regards,
Tom