screen resolution

More
10 years 2 months ago #78973 by dinkata
Replied by dinkata on topic screen resolution

I can read "rucen hod" so that is Russian, right??

:) Yes, it is "manual movement" .language Bulgarian .here's displays

Attachment not found



Attachment not found



I use external buttons "start / pause / run"
forum.linuxcnc.org/forum/47-hal-examples...-hold-resume-buttons
Not always work correctly , Especially in the program when have M06 change tool .
But this is another topic,excuse my language , i use google translator .

Please Log in to join the conversation.

More
10 years 2 months ago #79026 by tommylight
Replied by tommylight on topic screen resolution
Nice, i have been to Bulgaria over 50 times from 1992 to 1997, in Sofia mostly, but i forgot most of Bulgarian language.
Merci
Tom.

Please Log in to join the conversation.

More
3 years 9 months ago #261005 by probamo
Replied by probamo on topic screen resolution
Is there anyone that could provide apps for 2.8 or 2.9 edition. This works only at 2.7?

Thanks

Please Log in to join the conversation.

More
3 years 9 months ago #261064 by dinkata
Replied by dinkata on topic screen resolution
see here :
Machinekit con GUI gmoccapy_lcd7: Cambios de gmoccapy_lcd7 con respecto a la original gmoccapy. (machinekit-gmoccapy-lcd7.blogspot.com)

Please Log in to join the conversation.

More
3 years 9 months ago #261114 by HansU
Replied by HansU on topic screen resolution
If you are using 2.8 you have to install glade-gtk2 and modify the gmoccapy.glade file to match the reduced screen like shown in the previous post.
If you are using 2.9, Gmoccapy has a new feature to modify the GUI by a user command file: linuxcnc.org/docs/2.9/html/gui/gmoccapy.html#_user_command_file
The advantage is that you don't have to replace that file after every update.

Please Log in to join the conversation.

More
3 years 9 months ago #261943 by HansU
Replied by HansU on topic screen resolution
I player around a bit and figured out that it's more work to get the resolution down.
To get a smaller height than 660 you also have to re-order the settings pages...
What is your targeted size you'd like to achieve? 800x600?

Please Log in to join the conversation.

More
3 years 9 months ago #262029 by probamo
Replied by probamo on topic screen resolution
800x600

Please Log in to join the conversation.

More
3 years 9 months ago #262032 by HansU
Replied by HansU on topic screen resolution
Which version of LinuxCNC are you using?

Please Log in to join the conversation.

More
3 years 9 months ago #262039 by probamo
Replied by probamo on topic screen resolution
2.7.15

Please Log in to join the conversation.

More
3 years 9 months ago #262040 by probamo
Replied by probamo on topic screen resolution
"gmoccapy_lcd7" this does not work with 2.8 edition unfortunately.

Please Log in to join the conversation.

Time to create page: 0.060 seconds
Powered by Kunena Forum