Home all button

More
10 years 6 months ago #73695 by pommen
Home all button was created by pommen
Hello there,

I've been using Gmoccapy a bit now and I'm loving it.

In the homing menu there's a the X Y Z buttons, and they work well for me. There are however a a "home all" button I cant get to work. Is there something that I need to enable/change to make that button home all axies at the same time with only one button push?


/Peter

Please Log in to join the conversation.

More
10 years 6 months ago #73702 by cncnoob1979
Replied by cncnoob1979 on topic Home all button
Hey!

Haven’t had any issues that you are experiencing. Have you made any modifications?

Please Log in to join the conversation.

More
10 years 6 months ago #73707 by joekline9
Replied by joekline9 on topic Home all button
do you have HOME_SEQUENCE =
in each [AXIS] section of your ini file?

[AXIS_0]
.
.
HOME_SEQUENCE = 1

[AXIS_1]
.
.
HOME_SEQUENCE = 2

[AXIS_2]
.
.
HOME_SEQUENCE = 0

Please Log in to join the conversation.

More
10 years 6 months ago #73723 by pommen
Replied by pommen on topic Home all button
That was a really good guess joekline9!

it worked as soon as I entered the HOME_SEQUENCE

The ini file is mainly made from PnCConf. Not sure if I accidently deleted the entries before, of if they were never there ro begin with. Nonetheless, its works great now. Thanks!

/Peter

Please Log in to join the conversation.

More
9 years 4 months ago #94842 by AlbertHall
Replied by AlbertHall on topic Home all button
Would those settings be overwritten if I use stepconf?

Please Log in to join the conversation.

More
9 years 4 months ago #94846 by Todd Zuercher
Replied by Todd Zuercher on topic Home all button
If you changed or added them, yes.

Please Log in to join the conversation.

Time to create page: 0.181 seconds
Powered by Kunena Forum