ExternalButton_SingleBlock

Hello ,
I like and use gmoccapy .I have a question:
use external buttons start and stop program
is it possible to be made external button " single block " , as " step by step ".
But so that it can be turned and off at any point in the program.



excuse me, I use google translator

This is a hal question, not a gmoccapy related one, you should ask in that section.

@Admin: Please move to corresponding section.

@dinkata: Where are you from?

Norbert

I'm from Bulgaria .
In our factory I do retrofit . Replacement of old CNC with Linuxcnc..
Now already has a milling machine and a lathe with Linuxcnc

www.cnc-club.ru/forum/viewtopic.php?f=14...697&p=240433#p240433

www.cnc-club.ru/forum/viewtopic.php?f=14...717&p=261480#p261480

Here I found some answers to my questions :woohoo:

forum.linuxcnc.org/forum/47-hal-examples...-hold-resume-buttons