gmoccapy changes display from G55 to G54

Hi

While i make G55 command in mdi mode current axis display changes and stays to G55.


While i turn to auto mode-> load file -> hit Run program gmoccapy changes current axis to G54. Program goes through correct with G55 coordinates.

If i like to use manual mdi codes after runned program i have to remember give every time in mdi mode command G55 or else i fuck up my work, tools etc etc..

Programs starts i have line:
G21 G40 G90 G55 G64 P0.01

Why current axis display wont stay G55?

Do your program end with G2 or G30?

See here for details.

Norbert

You mean M2 and M30?

I use M30. So that is not fault its feature??

So there is no way to keep G55 selected all the time?

If i end program with % G55 stay correct but its said that use of % is not recommended. Program gives also error message about usage of % but works. Its said that The state of machine is quite a random on the beginning of next move.

Yes M2 and M30:-)

Use % at first and last sign / line in your program to stay in G55.

Norbert