Gmoccapy config

newbynobi
Offline
Platinum Member

10 years 3 months ago #77105 by newbynobi

Replied by newbynobi on topic Gmoccapy config

That is very strange, what distro do you use?

I use debian jessie and Ubuntu to test and did not had this behavior.

A quick solution would be:

open

Code:

/usr/share/gmoccapy/gmoccapy.glade

with a normal text editor (you will need root rights)
search for

Code:

box_info

then look for

Code:

<property name="height_request">200</property>

and change the number 200 to 250, save and try.

Norbert

Please Log in to join the conversation.

vre
Topic Author
Offline
Platinum Member

10 years 3 months ago #77121 by vre

Replied by vre on topic Gmoccapy config

Iam using wheezy and with this patch (from 200 to 250) all are fine thank you.

One more question..
I have setup xhc-hb04 mpg pendant and i have a button that executes in MDI G10 L20 P0 X0 Y0 Z0
to zero workpiece.Everything works fine except that live plot does not update to new 0.
I have to reopen the ngc file for updating the live plot .
Is there any solution for automatic updating live plot after MDI G10 L20 P0 X0 Y0 Z0 ?

Please Log in to join the conversation.

Time to create page: 0.032 seconds