How to setup a 4axis gantry plasma machine using gmoccapy?

• newbynobi
• Offline
• Platinum Member
• 

Less More

• Posts: 1916
• Thank you received: 0

9 years 10 months ago #83732 by newbynobi

Replied by newbynobi on topic How to setup a 4axis gantry plasma machine using gmoccapy?

Attachment not found

see the botton button list

Norbert

Please Log in to join the conversation.

• andypugh
• Offline
• Administrator
• 

Less More

• Posts: 19306
• Thank you received: 0

9 years 10 months ago #83915 by andypugh

Replied by andypugh on topic How to setup a 4axis gantry plasma machine using gmoccapy?

Specific setup thread moved to Basic Config

Please Log in to join the conversation.