Tool offsets don't display on main screen.

More
9 years 6 months ago #90742 by turbo
Tool offsets don't display on main screen. was created by turbo
It has the correct number and name, but the offsets are all zero.

Attachment not found

Please Log in to join the conversation.

More
9 years 6 months ago #90758 by newbynobi
Replied by newbynobi on topic Tool offsets don't display on main screen.
Have you connected the tool-offset pins in your postgui.hal?
I bet you have not ;-)

See tool related hal pin

Norbert

Please Log in to join the conversation.

Time to create page: 0.077 seconds
Powered by Kunena Forum