Gmoccapy Simulation

Hi,

I just installed a virtual machine at my office pc, running linuxcnc in order to try some macros or configs.

But I have really basic problems wit the simulated gmoccapy. I don't get the axis homed and I dont understand how homing is working in simulation mode?

Any ideas?

thanks

Matthias

Hallo Matthias,

- out of estop
- machine on
- Homing page ,most left bottom button
- press home all button

Have you seen the basic video in you tube?

Norbert

Hello newbynobi,

thank you for the replay.

Now it works. Yesterday it always started the homing, but never found the ref switch. I dont know why, but as long as is works now, it's fine...

Matthias