Arrowkeys in numpad does not work as shortcuts

More
9 years 5 months ago #92869 by suspension
Arrowkeys in numpad does not work as shortcuts was created by suspension
I am using Gmoccapy as my interface and I have enabled keyboard shortcuts. However arrow keys in my numpad does not move the spindle. The normal arrow keys and pageup/pagedown work as expected. However everything works fine with the Axis interface. Is there any setting I need to do in order to get this to work?

Please Log in to join the conversation.

More
9 years 5 months ago #92874 by Todd Zuercher
Replied by Todd Zuercher on topic Arrowkeys in numpad does not work as shortcuts
Did you try toggling the NumLock key?

Please Log in to join the conversation.

More
9 years 5 months ago #92878 by suspension
Replied by suspension on topic Arrowkeys in numpad does not work as shortcuts
yes, I tried without success.

Please Log in to join the conversation.

More
9 years 5 months ago #93492 by newbynobi
Replied by newbynobi on topic Arrowkeys in numpad does not work as shortcuts
I added your wish to my todo list. I will check if it is possible to include.

Please be pation, I am very busy with my new job, so it will take a while.

Norbert

Please Log in to join the conversation.

More
9 years 5 months ago #93494 by suspension
Replied by suspension on topic Arrowkeys in numpad does not work as shortcuts
That will be really great. I appreciate your effort. Thank you.

Please Log in to join the conversation.

More
9 years 3 months ago #95265 by newbynobi
Replied by newbynobi on topic Arrowkeys in numpad does not work as shortcuts
Hallo suspension,

I just pushed new releases to 2.7 and master supporting Key Pad Jogging.

Norbert

Please Log in to join the conversation.

More
9 years 3 months ago #95270 by suspension
Replied by suspension on topic Arrowkeys in numpad does not work as shortcuts
That's fantastic. Thank you.

Please Log in to join the conversation.

Time to create page: 0.095 seconds
Powered by Kunena Forum