Remap T6 in gmoccapy error ?

Hi
Sorry, me again

If I activate REMAP=M6 modalgroup=6 prolog=change_prolog ngc=change epilog=change_epilog
in
[RS274NGC]
PARAMETER_FILE = MeBigCNC3.var
SUBROUTINE_PATH = macros
RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.005 G80 G90 G94 G97 M5 M9
# turn on optional features in this case just INI and HAL reading
FEATURES=12
# This is the sub, with is called when a error during tool change happens
ON_ABORT_COMMAND=O <on_abort> call
# The remap code
REMAP=M6 modalgroup=6 prolog=change_prolog ngc=change epilog=change_epilog

my screen seems to block, but after ca 2 min i get the error message.


If I comment that line everything seems to work normal.
I'm not sure if I need that for Norberts tool adjustment function ?
P.S.
In the moment I'm on setting up this feature and test it on my lab bench.

THX Mike

Here some additional information



Do I have eventually something wrong with my Python installation and how could I test?
Anybody any idea?

THX Mike

S O L V E D

Typical NRFM ( Never Read the Fucking Manual )

After several time looking in the Doc i found that I MUST COPY the directory PYTHON into my directory structur.

Now I have no more errors and see the touch off working.

Mike

It looks like it can't find toplevel.py from the screen dump. The folder might be python27 or something similar. I can't really help but that is the clue I would chase down.

You beat me by a couple of minutes.. Glad you got it going