Error message

I have the feeling that i do overlook something.

Had no time since weeks to start my application and got this today



Can't remember that I changed something on lcnc, just that I tried to make a save via clonezilla and did not manage

Any hint where to look
THX
Mike

Try installing the "onboard" on screen keyboard.
Open a terminal and type without the quotes "sudo apt-get install onboard" , enter the password and press "y" when prompted for it.

I am pretty sure, that the error is not caused due to a missing onboard keyboard.
The first error shows that gmoccapy can not find a space label. Did you modify the glade file?

And please start from a terminal and post the output, as that information will give more details.

Norbert

THX to both of you

I'll try later, having done the duties my gave me.

But i slightly remember that i did that cross to activate screenkeyboard.

Where Norbert are these parameters stored? My first Test would be just to revert that activation.

ThX Mike

Onboard install did not help. And yes I can use that utility now.

I attach my a application and the result from linuxcnc started in terminal.

P.S.
I can start other applications, with my 7i76e/7i73 and another using gmoccapy...
I guess it's something in mine, but can't find it.


Help is once more very much appreciated

Mike

Anybody any idea?

How can i switch off screenkeyboard in gmoccapy when it can not be started?

Hallo,

the error is prior to gmoccapy, as:
milltask does not start!

Please disable all embedded tabs, and all hal files and then start again and post the result.

Norbert

Finally found the reason.

It was a erroneous parameter file of ncam

/home/cnc/linuxcnc/configs/MeBigCNC3 /ncam/catalogs/mill/projects/default_template.xml

deleted it and up everything runs again.

THX Norbert for the hint

P.S.
Took me very long to respond as I'm also very business loaded or got high level interrupts by high DD {domestic duties] ;-(