Errors = how to solve these

Get following errors in my mill Gmoccapy setup - those lines in BOLD what is wrong? Gtk Gdk ??
Last line must be the standard RPM progress bar as it does not function!

**** GMOCCAPY GETINIINFO ****
Preference file path: gmoccapy_preferences
[]
**** GMOCCAPY INFO ****
**** No gmoccapy2.glade file present ****
**** GMOCCAPY INFO ****
**** Invalid embeded tab configuration ****
**** No tabs will be added! ****
**** GMOCCAPY INFO ****
**** audio available! ****
**** GMOCCAPY INFO ****
**** virtual keyboard program found : <onboard>
**** GMOCCAPY INFO ****
**** no valid probe config in INI File ****
**** disabled tool measurement ****
**** GMOCCAPY INFO: Gcode.lang found ****

(gmoccapy:4700): GtkSourceView-CRITICAL **: gtk_source_language_manager_set_search_path: assertion 'lm->priv->ids == NULL' failed
**** GMOCCAPY INFO : inifile = /home/bengt/linuxcnc/configs/combimill/combimillx.ini ****:
**** GMOCCAPY INFO : postgui halfile = postgui.hal ****:

(onboard:4710): Gdk-CRITICAL **: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
Emit interp-run
1 2
Emit interp-run
Something went wrong, we have an unknown spindle widget
Something went wrong, we have an unknown spindle widget

Tecno

I have had the first error on my system since day one and it seems to work ok. I have no idea about the second one.

John

It sure does appear to work OK except the RPM bar at low right = lifeless!

First of all, sorry for having been away so long, but work brings money, not the hobbies?

Please post your complete config and also the complete terminal output. There must be something else wrong or misconfigured, as the unknown spindle widget line should never be reached.

Norbert

Hello Norbert,

Glad to here you are back and hopefully also OK.
Will enclose my configs tomorrow, (football......)

Can you take look at my lathe errors in earlier subject, thanks.

newbynobi wrote: First of all, sorry for having been away so long, but work brings money, not the hobbies?

Please post your complete config and also the complete terminal output. There must be something else wrong or misconfigured, as the unknown spindle widget line should never be reached.

Norbert

I hope I have all necessary files included in above ZIP

mfg
Bengt

I can not find anything strange in your hal or ini files, but there is a problem with iptables, as modprobe can not load them. I am relative shure that the unknown spindle widget error is just a later reaction to that error.

Norbert

There is no postgui with and how should this be written and where

gmoccapy.spindle_feedback_bar
gmoccapy.spindle_at_speed_led

Have you solved the iptables error?

Postgui.hal, just see the example configs.

Norbert

Yes IP table error is solved = has nothing to do with the errors!

have not seen any examples Norbert but I have solved that as well.
I am not so fluent on LinuxCNC but I am learning

Only those GTK GDK error are left, all apperas to work but what are those?