gmoccapy no entry found in [TRAY]

More
8 years 3 months ago #115054 by chrisfairbrother
gmoccapy no entry found in [TRAY] was created by chrisfairbrother
Hi, I am testing Linuxcnc master using Gmoccappy 2.3.3.3. While resolving a slow jog velocity, I saw the following error:-

"No DEFAULT_LINEAR_VELOCITY entry found in [TRAY] of INI file
Using half on MAX_LINEAR_VELOCITY"

This is generated from /usr/share/pyshared/gmoccapy/getiniinfo.py on line 214 and two other following velocity statements.
Should these not be [TRAJ] ?

Please Log in to join the conversation.

More
8 years 3 months ago #115075 by cmorley
Replied by cmorley on topic gmoccapy no entry found in [TRAY]
Surely - IFIAK Gmoccapy does't add a heading called TRAY

Chris M

Please Log in to join the conversation.

More
8 years 3 months ago #115134 by andypugh
Replied by andypugh on topic gmoccapy no entry found in [TRAY]
I guess that these are just typos in the error messages.

Please Log in to join the conversation.

More
8 years 3 months ago #115176 by chrisfairbrother
Replied by chrisfairbrother on topic gmoccapy no entry found in [TRAY]
Yes. They may be misleading to newer users.

Please Log in to join the conversation.

More
8 years 3 months ago #115183 by cmorley
Replied by cmorley on topic gmoccapy no entry found in [TRAY]
Pushed a fix - thanks for the info.

Chris M

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum