Jog Axis no Function by last update

Weiler810T
Topic Author
New Member

8 years 2 months ago #116245 by Weiler810T

Replied by Weiler810T on topic Jog Axis no Function by last update

newbynobi wrote: Hallo,

this is the relevant error:

Code:

gmoccapy_postgui.hal:40: Pin 'gladevcp.hal_mtk' does not exist

If this pin is a part of a embedded panel, you will need to load / connect that pin within the glade hal file, while loading the panel.

Like you do with other panels, i.e.

Code:

gladevcp -x {XID} -H Weiler_810T_panel.hal Weiler_810T.glade

What is this pin for?

Norbert

Hallo Norbert

Is that right?

Code:

#Probe_Screen
EMBED_TAB_NAME=Probe Screen 
EMBED_TAB_LOCATION = ntb_user_tabs
EMBED_TAB_COMMAND = gladevcp  -x {XID} -u python/probe_screen.py probe_icons/probe_screen.glade -H probe_screen.hal
# EMBED_TAB_COMMAND = gladevcp  -x {XID} -W  probe_screen.hal probe_icons/probe_screen.glade

Please Log in to join the conversation.

Weiler810T
Topic Author
New Member

8 years 2 months ago #116247 by Weiler810T

Replied by Weiler810T on topic Jog Axis no Function by last update

I found out

it works :silly: :woohoo: :laugh: :laugh: :laugh:

Code:

#Probe_Screen
EMBED_TAB_NAME=Probe Screen 
EMBED_TAB_LOCATION = ntb_user_tabs
EMBED_TAB_COMMAND = gladevcp  -x {XID} -u python/probe_screen.py -H probe_screen.hal probe_icons/probe_screen.glade

learning by doing :laugh: :whistle:

Please Log in to join the conversation.

Time to create page: 0.031 seconds