Jog +,-, turtle position

hello all, I use a joypad to pilot linu cnc by gmoccapy intraface , and I want to change the velocity of the jog by the joypad , but i dont find the keyboard shorcut to the +, -, and turtle button.

sorry for my english , because I'm french

thx for your answers

Philippe

use the HALUI Jogspeed button to set your speed

Ok for the video, but with this i dont know how i add a keyboard shortcut to a function on Gmoccapy. My joypad is work fine, but i want to add somme supplemantary fuction on the differents butun such as to switch on the turtul , to modif the jog speed with the slider....

There are no keyboard shortcuts for the button of the jogspeed slider, nor for the turtle button, as they are not needed.

Please look at the corresponding availible gmoccapy hal pin. They are described in gmoccapy doc or you just go to settings page and take a look on halshow.

Norbert

ok, but for me is necessary , because when i made the zero on my stock with je joypad, I must change every time the speed of the jog. so i must change it on the keyboeard.
For me it was "nice toe have"

You can do the connections with hal.
When i am at home and find some time i might be able to post my hal file.

Norbert

Hi,

here are my hal files, I use the keypad function of the MESA 7i73 to connect the buttons.
I added all files I use for my MPG based on 7i73, including display connections, as the may help also others.

Norbert

Hi Norbert,
i dont know this card, but i think that it' s verry intresting to create our own panel.
so do you have somme informations or a link to connect this card to the PC and how do you put your file in gmmocapy.