I have som questions I hope to get clarified on how-to.
Home all axis
move to toolheight probe, X and Y are clear to me but Z confuses me so I would like to get help on how-to set all correct.
Code:
[TOOLSENSOR]
# Absolute coordinates of the toolsetter pad
X = 10 >>>>>> 419.5
Y = 10 >>>>>> 95
# Absolute Z start search coordinates
Z = 60 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is confusing
# Maximum search distance and direction (sign)
MAXPROBE = -60 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Want to start from Z home
# Speed of movements during working in Probe Screen
RAPID_SPEED = 600
# Diameter of toolsetter pad
TS_DIAMETER = 12.7
# The speed of the reverse rotation of the spindle when measuring the tool diameter
REV_ROTATION_SPEED = 300
Attachment not found
Left arrow in picture I get a negative value of -112.0667 and it is here the confusion starts.
I want to get my MP10 probe to be my master tool T1
Tool table is empty
How do I get all correct to the set correct TS height?
Is it the dimension from table to probe top that is the TS Height? That is measured to be -93.5
