gmoccapy 3.0.8 is out!

Hi Norbert,

thanks for the reply. I understand the behavior for the X Axis but not for the Z Axis.

Here is what happens when I push the 1mm jog button:

G8: X moves 1mm / Z moves 1mm (all good)

G7: X moves 0.5 / Z moves 0.5mm ( X is good as we are in Diameter mode - but why is Z only moving 0.5)

The Z Axis movement should not be impacted by G7/G8, or?

Thanks.

Best regards,

-Markus

I need to check this, as that would be a bug!
Will need the weekend for that!

I just pushed 3.0.8.1 to 2.8 branch, solving this issue. Thanks Markus for reporting.

Now only X axis will jog half the distance being in diameter mode, all other axis will jog the requested distance.

Norbert

Hi! I have a desktop computer cpu core i3-560 ram 12Gb. Installed DebianStretch9 + linuxcnc 2.8pre-1.540.
Gmoccapy 3.08.2 super! But there is a problem downloading file 35Mb. Well, a very long time, the visualization is bad and you can’t touch it. In this plan, the Qtpyvcp brender works well. If so done in Gmoccapy, he would be the best!
Thanks for attention!

I have never loaded a f. 'le of that size is this just a matter of loading time? I Know that the preview is very slow but I have not. coded t hat part

How can I send you a file so that you can download and you will see what I mean. And compare with the download in the Qtpyvcp Brender simulator.
Скачать

I just downloaded the file, should be able to test till weekend

Here is the file in work. Pay attention to the loading of RAM and CPU.
I still have one problem a little off topic but if possible please give advice here on this error. Thanks!
Question filmed is not decoded Cyrillic.

Was rumming around with the lathe examples. There is a small thing with the "PROGRAM_PREFIX" in the ini files in gmoccapy/lathe_configs, there should really be one more "../" in the PROGRAM_PREFIX, like so In lathe.ini it now says and I had to remove that ":." to have it find the files in ../../../nc_files.

There is also one thing with the stop-button in the lower right corner when running macros. It often places itself right ontop of the onboard keyboard icon. Is it possible to move one or the other? It often happens that the keyboard is up and I can't get it down because the stop button is in the way. And it hides all control buttons on the lower part of the screen.

Cool gui,how about camshaft grinder gui?with auto touch,then add macro call,