Change Mode with HAL pins

More
7 years 1 month ago #144522 by nonkeldw
Change Mode with HAL pins was created by nonkeldw
Hello
I want to change the mode (Manual, MDI, auto,..) of gmoccapy, is it possible to do this with HAL pins? I can't find the right HAL pins to do this

Thanks

Please Log in to join the conversation.

More
7 years 1 month ago #144525 by pl7i92
Replied by pl7i92 on topic Change Mode with HAL pins
changing the mode from WHERE
MPG
sidepanel VCP ?

Please Log in to join the conversation.

More
7 years 1 month ago #144527 by nonkeldw
Replied by nonkeldw on topic Change Mode with HAL pins
From hardware button (input from MESA Card)

Please Log in to join the conversation.

More
7 years 1 month ago #144529 by pl7i92
Replied by pl7i92 on topic Change Mode with HAL pins
the simplest way is to use the postgui HALUI

halui.mode.auto
halui.mode.manual
halui.mode.mdi

Please Log in to join the conversation.

More
7 years 1 month ago #144532 by nonkeldw
Replied by nonkeldw on topic Change Mode with HAL pins
Thanks! I found the HAL pin in the manual.

Please Log in to join the conversation.

More
7 years 1 month ago #144533 by pl7i92
Replied by pl7i92 on topic Change Mode with HAL pins
NP you are welcome
happy to get you thrue

Please Log in to join the conversation.

Time to create page: 0.129 seconds
Powered by Kunena Forum