Problem with hal pins (solved)

More
6 years 8 months ago #156326 by Gaunt1969
Problem with hal pins (solved) was created by Gaunt1969
In the new version , did the hal pins change for the spindle? And if so what are they?

Please Log in to join the conversation.

More
6 years 8 months ago #156328 by tommylight
Replied by tommylight on topic Problem with hal pins (solved)
Where is the problem ? And why did you title it as "solved", where is the solution ?
That is very misleading, and confusing for other users.

The 2.8 and 2.9 version use spindle.0. in the hal files as they do support multi spindle setups.

Please Log in to join the conversation.

More
6 years 8 months ago #156372 by Gaunt1969
Replied by Gaunt1969 on topic Problem with hal pins (solved)
Sorry about that spindle.0. Is the solution I thought I had posted it.

Please Log in to join the conversation.

More
6 years 8 months ago #156390 by tommylight
Replied by tommylight on topic Problem with hal pins (solved)
Thank you.

Please Log in to join the conversation.

More
6 years 6 months ago #163872 by ajsinfotech
Replied by ajsinfotech on topic Problem with hal pins (solved)
Hi

I am building on a RPi3 + Mesa7c81 + Debian Buster platform. I decided to use GMOCCAPY because I had some problems configuring Qt environment.

So about GMOCCAPY, why I can not see any GMOCCAPY pin/object in halshow?
What is missing?

Thanks

Please Log in to join the conversation.

More
6 years 6 months ago #164202 by newbynobi
Replied by newbynobi on topic Problem with hal pins (solved)
If gmoccapy is running the pins should be vissible

Norbert

Please Log in to join the conversation.

Time to create page: 0.088 seconds
Powered by Kunena Forum