gmocappy clock

Figured out I have physical buttons code in .hal. halui.program.is-running is causing the issue. Commenting out Clock panel works. Please share is there any way to using same pin twice.

Connect to the signal name not to the Hal pin should work

Norbert

My lathe.hal file has
# External Program Pause and Run Buttons

# Run Section

net run-step-btn or2.0.in0 and2.1.in0 <= parport.0.pin-13-in
net pause-on and2.1.in1 <= halui.program.is-paused
net my-or1 or2.0.in1 <= and2.1.out
net run-sig halui.mode.auto halui.program.run <= or2.0.out

# Pause Section

net pause-resume-btn and2.0.in0 <= parport.0.pin-15-in-not
net run-on and2.0.in1 <= halui.program.is-running      I have to comment out this
net pause-sig halui.program.stop <= and2.0.out
setp halui.mode.teleop 1

#########################################
Timer.hal file 
# This will be the timer.hal file

# give the interval to set a alarm in minutes
setp timer.periode_time_machine 2
setp timer.periode_time_spindle 1

net machine timer.machine_on <= halui.machine.is-on
net spindle timer.spindle_on <= halui.spindle.0.is-on
net running timer.running <= halui.program.is-running                                                                Or have to comment out this.

net num_peris_ma timer.elapsed_periodes_machine
# => a label pin or what ever you want to do with this information
net num_peris_sp timer.elapsed_periodes_spindle
# => a label pin or what ever you want to do with this information

net alarm_machine timer.alarm_machine
# => to a pin to connect a light on, or may be a lube signal
net alarm_spindle timer.alarm_spindle
# => to a pin to connect a light on, or may be a lube signal

The working Job Counter.

1. Set the no of Jobs to be produced by entering numbers besides Parts button. Click over it to sent to classicladder.
2. if we do have yesterday's produced parts, put them in besides Stock button field and validate.
3. Now we start producing parts. As soon as we reach our last part. we have glowing LED All Done, Along with machine stop.
4. Reset button for Stock value zero
   1. I would also like Parts counter to be dark

Relevant files are attached below.   
in .ini file put
EMBED_TAB_NAME = counter
EMBED_TAB_COMMAND = gladevcp -x {XID} -H counter.hal counter.glade
EMBED_TAB_LOCATION =box_custom_4 

       

you will need a counter.py file, just to set the used theme.
You may look in original timers files.

Norbert

Thanks,
Theme issue resolved by keeping identical theme for system as well as Linuxcnc.
 

Thanks for the materials. I used the corrected glade file and hal logic for myself. Everything works as I needed.

completely by chance there is no timer version for 2.9? Moved from 2.8 and now does not work. It's very sad...

or can there be an online converter .py file from 2 to 3 versions?

Maybe this helps:
python2to3.com/