Solved : Setup Basic Z Touch Off

forget the macro for now and touch off using the provided buttons.

@rodw,

What buttons do you mean? I will be able to check on this, this weekend hopefully.

Norbert

@norbert, the g54 offset settings on the jog tab.

Ah, OK that should work!

Hallo AlexDoran,

I do not know why, but the problem seems to be related to "Case Sensitive letter handling". IMHO emc task is not doing a good job here.

The error is: as you mentioned.
The problem is the same, using the macro button or entering in the MDI window O<ZProbe> call

Changing the name of the macro to be: z_probe.ngc with the content being the same as in the original file

solves the file not open problem.

This is not related to gmoccapy, and I will open a bug issue for that.
Hope you can live with the work around.

Norbert

Hi newbynobi,

Thank you very much for taking the time to Investigate that for me - I'll be honest I would never figured that out!! Also good to know it wasn't me being dumb, I will make sure everything I do from here is lower case, I am kind of OCD with cases but needs must!

Thanks again