Gmoccapy License?

APaulsen
Topic Author
Offline
New Member

5 years 7 months ago #202096 by APaulsen

Screen shots of gui designs was created by APaulsen

does anyone know what license Gmoccapy is?

Please Log in to join the conversation.

robertspark
Offline
Platinum Member

5 years 7 months ago #202099 by robertspark

Replied by robertspark on topic Screen shots of gui designs

APaulsen wrote: does anyone know what license Gmoccapy is?

what do you want to do with it?

Please Log in to join the conversation.

andypugh
Offline
Administrator

5 years 7 months ago #202153 by andypugh

Replied by andypugh on topic Screen shots of gui designs

APaulsen wrote: does anyone know what license Gmoccapy is?

github.com/LinuxCNC/linuxcnc/blob/master...gmoccapy/gmoccapy.py

Says GPL v2

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

5 years 7 months ago #202220 by newbynobi

Replied by newbynobi on topic Screen shots of gui designs

Yes, it is GPL2 so open source, but if you modify code or use some of mine, you will need to public also your code.

(That is only in short therms, for further information you will need to read the GPL2 license code)

Norbert

Please Log in to join the conversation.

Time to create page: 0.100 seconds