2.9.0-pre0-4388-gc2838822c / Gmoccapy >> Py 3 // gladevcp/iconview.py

That worked. Thanks.
But now I have two issues.
When gmoccapy loads in, it won't fit the screen. All the icons are outside the screen boundaries, and I can't find a way to resolve this.
Also, on my previous version of gmo I had done quite a bit of work changing a few features and adding buttons etc. All that has now gone.
Ideally I would prefare my previous version back,as that was working just fine.

If I copy the script from my previous version backup file(3.1.3.1) into the current gmoccappy file, then I get an error at line 30 - import hal 
No module named hal
?

maybe post your script for a check as it's probably a python 3 thing going from old to new (I am no expert and probably won't be able to help but maybe someone will be able to help)

I'm going to start a different thread for this issue, instead of tagging it at the end of this one.