Buidling LCNC 2.8.2 RIP - with Gmoccapy

Hello,

I built LCNC RIP 2.8.2 for Raspbian 10 yesterday.
Raspbian from LCNC did not work for my version Raspberry (I dont know why), so I had to use natural Raspbian.

I used this website:
linuxcnc.org/docs/stable/html/code/building-linuxcnc.html

If I used only this instructions, Gmoccapy dont work, only Axis.

I have to:
Source: 
forum.linuxcnc.org/9-installing-linuxcnc...lade-linuxcnc#112162

and

Is possible this package add to /home/pi/LinuxCNC/linuxcnc-2.8.2/debian/configure ?

Or exist some reason why not?

Many of these packages would normally be installed as dependencies of packages which are already in

github.com/LinuxCNC/linuxcnc/blob/master/debian/control.top.in
github.com/LinuxCNC/linuxcnc/blob/master.../control.main-pkg.in


It's not trivial to work out which need to be mentioned individually, but we have checked that the current list works on the buildbot platforms.

but we have checked that the current list works on the buildbot platforms.

Did you check with Gmoccapy? With AXIS it worked.

At least one Gmoccapy config has been tested

github.com/LinuxCNC/linuxcnc/issues/1762

If I understand you correctly, it works now for you after you have installed the dependencies you listed?

If I understand you correctly, it works now for you after you have installed the dependencies you listed?

Exactly. 

andypugh wrote:

At least one Gmoccapy config has been tested

github.com/LinuxCNC/linuxcnc/issues/1762

But I want use LCNC 2.8. There is Python 2. Idont know what do you mean with this test. 

andypugh wrote:

but we have checked that the current list works on the buildbot platforms.

 
Your check have bug, or I do something that no one expects. (The second way is often )

I made another RIP Instalation with normal Debian not RPI Debian And I needed install the packages, which I mentioned at the beginning too.
I don't know if I need them all, but I'd rather have some extra packages than have LCNC not work for me.

I downloaded Live CD 2.8, and made bootable flash disk. I installed the flash disk. I "apt-get remove" all package with name *linuxcnc*. I installed RIP LCNC 2.8 linuxcnc.org/docs/stable/html/code/building-linuxcnc.html

Now LCNC 2.8 works. BUT only with AXIS or another GUI. Now LCNC 2.8 with Gmoccapy DONT works.

Then I install package which I mentioned at the beginning and LCNC 2.8 with Gmoccapy works.

It's not a problem for me. when i know this problem. But it might discourage someone who wants to start exploring the LCNC source code. What can I do to fix this error systemically?

I have another free PC where I can do some other test that would help you, but I need to know what would help you.

The easiest way is added the packages here:
linuxcnc.org/docs/stable/html/code/building-linuxcnc.html
OR?

This is some discusion in Facebook.
 
For RIP 2.8 you must known this reporitories.

The current run-time dependencies (from debian/control) are:

Depends:
${misc:Depends},
${python3:Depends},
${shlibs:Depends},
libudev-dev,iptables,
blt,
mesa-utils,
python3-tk,
python3-numpy,
python3-cairo,
python3-gi-cairo,
python3-opengl,
python3-configobj,
python3-xlib,
libgtksourceview-3.0-dev,
tcl8.6,
tk8.6,
bwidget (>= 1.7),
tclreadline,
tclx,
procps, psmisc,
udev
Recommends:
linuxcnc-doc-en | linuxcnc-doc,
librsvg2-dev,
hostmot2-firmware-all, linux-image-rt-amd64 [linux-amd64], linux-image-rt-686-pae [linux-i386],
python3-pil,
python3-pil.imagetk,
python3-pyqt5,
python3-pyqt5.qsci,
python3-pyqt5.qtsvg,
python3-pyqt5.qtopengl,
python3-opencv,
python3-dbus,python3-espeak,
python3-dbus.mainloop.pyqt5,
python3-pyqt5.qtwebkit,
python3-xlib,
espeak-ng,python3-numpy,
pyqt5-dev-tools,
gstreamer1.0-tools,espeak,
sound-theme-freedesktop
Suggests: mesaflash


The build-time dependencies are the above, and additionally:

Build-Depends:
debhelper (>= 9),
dh-python,
libudev-dev,
autoconf,
bwidget (>= 1.7),
desktop-file-utils,
gettext,
intltool,
libboost-python-dev,
libepoxy-dev,
libgl1-mesa-dev | libgl1-mesa-swx11-dev,
libglu1-mesa-dev,
libgtk2.0-dev,
libgtk-3-dev,
libmodbus-dev (>= 3.0),
libreadline-gplv2-dev | libreadline-dev,
libtirpc-dev,
libusb-1.0-0-dev,
libxmu-dev,
netcat,
po4a,
procps,
psmisc,
python3,
python3-dev,
python3-tk,
python3-xlib,
tcl8.6-dev,
tclx,
tk8.6-dev,
yapps2
Build-Depends-Indep:
asciidoc (>= 8.5),
dblatex (>= 0.2.12),
docbook-xsl,
dvipng,
ghostscript,
graphviz,
groff,
imagemagick,
inkscape,
python3-lxml,
source-highlight,
w3c-linkchecker,
xsltproc,
texlive-extra-utils,
texlive-font-utils,
texlive-fonts-recommended,
texlive-lang-cyrillic,
texlive-lang-french,
texlive-lang-german,
texlive-lang-polish,
texlive-lang-spanish,
texlive-latex-recommended,
asciidoc-dblatex,
texlive-xetex,
Standards-Version: 4.6.0
Vcs-Browser: github.com/LinuxCNC/linuxcnc
Vcs-Git: github.com/LinuxCNC/linuxcnc.git
Rules-Requires-Root: binary-targets

Package: linuxcnc-uspace-dev
Architecture: any
Conflicts: linuxcnc-sim-dev, linuxcnc-dev
Depends: ${misc:Depends},
${python3:Depends},
python3-serial,
linuxcnc-uspace (= ${binary:Version}),
udev,
python3-yapps


Many of the latter will be installed in one go with