RIP LCNC 2.9 - Gmoccapy dont work

4 years 3 months ago #246985 by zz912

RIP LCNC 2.9 - Gmoccapy dont work [SOLVED] was created by zz912

After start Linuxcnc:

Can I ask for help?

Please Log in to join the conversation.

4 years 3 months ago #246996 by robertspark

Replied by robertspark on topic RIP LCNC 2.9 - Gmoccapy dont work

install
sudo apt install gnome-icon-theme

it will more than likely sort out the iasue

Please Log in to join the conversation.

4 years 3 months ago #246998 by zz912

Replied by zz912 on topic RIP LCNC 2.9 - Gmoccapy dont work

I installed it. I rebuild LCNC. But nothing happen.

Please Log in to join the conversation.

4 years 3 months ago #247010 by zz912

Replied by zz912 on topic RIP LCNC 2.9 - Gmoccapy dont work

I solved it:

Code:

sudo apt-get install python3-gi-cairo

Please Log in to join the conversation.

4 years 3 months ago #247439 by andypugh

Replied by andypugh on topic RIP LCNC 2.9 - Gmoccapy dont work

You probably should make sure you have the rest of the dependencies:
github.com/LinuxCNC/linuxcnc/blob/master.../control.main-pkg.in

Please Log in to join the conversation.

Time to create page: 0.087 seconds